A Couple Of Things to Note About Ordering a Lupit Pole:
The pole has been designed for quick installation without ceiling bolt mounts drilling. Quality surface, unique upper disc Flex System and NEW Safety Block Nut ensures quicker installation and maximum safety to the dancer.
G2 Pole Features:
Cleaning and Maintenance
Cleaning: • The pole surfaces are: polished stainless steel, chrome finish and powder coated. Clean your pole with a soft cotton or microfiber cloth and pure water or pure alcohol. • Rubber grip surfaces on both discs must be cleaned using pure alcohol prior each installation to ensure proper friction with the floor and ceiling.
Maintenance: • It is recommended to replace the spin-block Hex screw (M8 x 12 mm) after every 6 months of daily use. • The rubber surfaces on both discs are recommended to be refreshed every 3 months by cleaning them by using “Nitro Diluent 900” and cotton wipe. It will make the rubber surface sticky again. • It is necessary to lubricate the lower bearing and upper bearing with “machine oil for bearings” or "grease for bearings" in spray every 3 months. Use a dry cotton cloth to clean the excess oil/grease drops on the discs. Check the support videos on our web site. • Check the rubber O-rings on the joint and if missing replace them with new. • Spare parts and some cleaning supplies can be ordered on our web shop. Disassembling the pole: • To take down your pole follow the installation procedure in reverse order. When loosening the pole’s thread, be sure to securely hold the pole to prevent it from falling over.
- Lupit Poles and shipped directly from Lupit Pole to you to save on shipping costs. Delivery time is 25-30 working days from date of order.
- Lupit Poles do not come with carry bags (these need to be purchased separately)
- f you also purchase an extension and/or carry bag at the same time as a pole the shipping cost of these items will be included in the shipping cost allocated to the pole (so no additional shipping cost). If you buy them items separately at a later date, there will be an additional shipping charge when you order them.
This revolutionary product is exclusive to Lupit Pole.
The Classic G2 Chrome pole is a spin-static, multi-piece, removable, portable dance pole. The LP Chrome finish is more “grippy” with a very smooth texture making it a great choice for beginners or people with slippery hands, as it is more forgiving of weaker handgrip strengths.
The pole has been designed for quick installation without ceiling bolt mounts drilling. Quality surface, unique upper disc Flex System and NEW Safety Block Nut ensures quicker installation and maximum safety to the dancer.
G2 Pole Features:
- Removable, multi-piece dance pole
- Spinning and Static mode with improved spin
- Quick installation without drilling
- Smooth and Unique tube Joint system
- Upper disc flex system absorbs bending force and distribute it equally giving improved stability
- Smooth pole design
- Extendable for ceilings from 2300mm/ 7fz 6.55in to 2800mm/ 9ft 2.24in - basic kit, with extra extension to maximum 3300mm/ 10ft 9.92in.
- Quadruple ball bearing system for top spin
- New Safety thread lock blocks nut blocks the pole against loosening
- High CHROME finish surface, EU origin STEEL aloy.
- Environmental boxing (does not come with carry bag, available for purchase seperatly)
Please Note
Before purchasing, please make sure that you have measured the floor to ceiling height of where you would like to install the pole. This would help you avoid any frustration when coming to install the pole, as you will have the correct extensions (if necessary) to reach your desired height.Cleaning and Maintenance
Cleaning: • The pole surfaces are: polished stainless steel, chrome finish and powder coated. Clean your pole with a soft cotton or microfiber cloth and pure water or pure alcohol. • Rubber grip surfaces on both discs must be cleaned using pure alcohol prior each installation to ensure proper friction with the floor and ceiling.
Maintenance: • It is recommended to replace the spin-block Hex screw (M8 x 12 mm) after every 6 months of daily use. • The rubber surfaces on both discs are recommended to be refreshed every 3 months by cleaning them by using “Nitro Diluent 900” and cotton wipe. It will make the rubber surface sticky again. • It is necessary to lubricate the lower bearing and upper bearing with “machine oil for bearings” or "grease for bearings" in spray every 3 months. Use a dry cotton cloth to clean the excess oil/grease drops on the discs. Check the support videos on our web site. • Check the rubber O-rings on the joint and if missing replace them with new. • Spare parts and some cleaning supplies can be ordered on our web shop. Disassembling the pole: • To take down your pole follow the installation procedure in reverse order. When loosening the pole’s thread, be sure to securely hold the pole to prevent it from falling over.
